Thickness

The most useful anodizing thickness, and consequently that of G.H.A.®, should be chosen according to the customer’s needs and the performance that you want to achieve. The range can range from 5 to 200 μm, depending on the alloy specification that you want to use.

Some examples of maximum thicknesses available for the main anodizing alloys:

SERIES 5000-7000: maximum thickness 150-200 μm

ALLOY 6060: maximum thickness 100-150 μm

ALLOY 6082: maximum thickness 80-100 μm

FUSION ALLOYS: To valutate case by case by composition and homogeneity

The most suitable choice for the customer is always made on the basis of a cost / performance ratio to be evaluated appropriately with the company G.H.A. Europe® that will advise on the best solution.